Oct 29, 2026 · Advanced · About 7 min read

v2rayN LAN Proxy Setup: Share Your PC’s Proxy with Phones, TVs, and Tablets

Enable LAN access, note your PC’s local IP and SOCKS/HTTP port, then configure proxy settings on other devices and secure access with Windows Firewall.

At a glance

For readers who have v2rayN set up on a Windows PC and want phones, TVs, or tablets on the same home network to use its proxy. First find the PC’s local IP address and the ports the client is listening on, then configure each device for a supported protocol. Test with one device first. Once it connects, restrict the firewall rule to the devices that need access.

How LAN proxy access works

In v2rayN, Allow connections from the LAN changes which devices can reach the proxy endpoint. By default, only apps on the PC can connect; enabling this option lets other devices on your local network connect too. Those devices must still send their traffic to the endpoint themselves. Changing the PC’s settings won’t automatically route every device in your home through the proxy, and you don’t need to set the PC as their default gateway.

App requestDevice proxy settingsPC listening portCore routing rulesMatching outbound

Once a request arrives, the core uses its configuration to choose an outbound route. Even if the request reaches v2rayN, it may match a direct-connection rule. The System Proxy option in the PC’s tray menu mainly affects apps on that PC; it doesn’t determine whether a phone can connect. Devices relying on this proxy may lose internet access while the PC is asleep, shut down, or v2rayN is closed.

Enable listening in v2rayN and confirm the IP and port

  1. First, make sure the node works on your PC. Open a page in a browser that’s already configured to use the proxy. Then, if the phone can’t connect, you can focus on the phone-to-PC connection instead of changing both the node and the protocol at once.
  2. Enable LAN access. In the v2rayN 7.x interface for Windows, open Settings → Parameter Settings from the main window. Look for Allow connections from the LAN on a core settings page, such as Core: Basic Settings. The option’s name may vary by version or interface language; it may also appear as Allow LAN connections. Save your changes and make sure the core reloads. If they don’t take effect, restart the client and check the listening address again.
  3. Find your PC’s local IP address. Run ipconfig in Windows Terminal. Find the Wireless LAN adapter or Ethernet adapter connected to your home router and note its IPv4 address. Don’t use a virtual network adapter’s address or the loopback address 127.0.0.1: entering that address on your phone would make it connect to itself.
  4. Check the port exposed to other devices. Check the proxy inbound settings and startup logs. If the interface has a separate LAN port enabled, use that endpoint’s actual port and protocol—not the local-only port. A mixed port can serve both HTTP and SOCKS5; if they listen on separate ports, enter the one that matches the protocol.
192.168.1.20
Example of a PC’s local IP address
10808
Example of a separate SOCKS5 port
10809
Example of a separate HTTP port

Check which proxy protocols the device supports before entering a port

If the device only provides fields for Proxy hostname and Proxy port, first check whether it uses HTTP. If so, enter the actual HTTP or mixed port. The numbers above are examples, not defaults for every version.

Set up proxy access on phones, tablets, and TVs

On an Android phone or tablet, go to Settings → Network & internet → Internet, open the details for your current Wi-Fi network, tap Edit, expand Advanced options, and set Proxy to Manual. On some devices, these options are under WLAN or Modify network. Enter only the PC’s address as the proxy hostname—don’t include http:// or paste the address and port together into the hostname field.

Manual proxy settings for Android Wi-Fi

Proxy type
HTTP
Proxy hostname
192.168.1.20
Proxy port
10809, or the port configured on your PC
Bypass proxy for
Leave blank for the initial test

Save the settings and test with a browser first. This setting applies to the current Wi-Fi network, not mobile data.

Apps that support SOCKS5

Proxy type
SOCKS5
Server address
192.168.1.20
Server port
10808, or the port configured on your PC
Applies to
Requests sent through this app’s proxy

If proxy authentication is enabled on the PC, the app must support it and use the matching credentials.

On a TV, look for Proxy or Manual proxy in the advanced settings for your current network. If that option is available, check whether it requires HTTP or another protocol. Without a system-wide setting, only apps with their own proxy settings can use the table above. If a browser can load pages but a video app bypasses the proxy, the app may ignore system proxy settings or use UDP traffic that a standard HTTP proxy can’t forward. Changing the port won’t change how the app handles network traffic.

Windows Firewall: Allow only the ports you need

Share the proxy only on a trusted home network. Make sure Windows identifies the network as Private; don’t change a public Wi-Fi network to Private just to set up the proxy. To allow access manually, search for and open Windows Defender Firewall with Advanced Security, then select Inbound Rules → New Rule → Port.

Can’t connect? Check listening, the local network, and outbound routing in order

First, check TCP listening from PowerShell on the PC. This example uses HTTP port 10809; replace it with the port configured on the device. Match the OwningProcess value with the PID on the Details tab in Task Manager to confirm the proxy core—not another program—is listening.

Get-NetTCPConnection -State Listen -LocalPort 10809 |
  Select-Object LocalAddress, LocalPort, OwningProcess

If you see only 127.0.0.1 or ::1, other devices can’t reach this endpoint. If you see 0.0.0.0 or the PC’s local IPv4 address, it’s listening for IPv4 connections from the LAN; next, check the firewall and network isolation. If there’s no matching entry, verify the port and check the core logs for startup errors or port conflicts.

Can I share the proxy if my PC uses Ethernet and my phone uses Wi-Fi?

Yes, as long as your router allows devices on both connections to communicate. If your phone is on a guest network, switch to the main home network. If it still times out, check for wireless client isolation and review the PC’s firewall. Both devices having internet access doesn’t mean they can reach each other.

How can I tell whether my phone’s proxy request reached the PC?

Open a browser that actually uses the Wi-Fi proxy settings, reload a page, and check the access logs on the PC. If logging is disabled, enable it temporarily and test again. If the logs show a request but the outbound connection times out, check the node and routing rules. If there’s no entry, check listening, the firewall, the IP address, and the port first.

It worked yesterday. Why can’t it connect after restarting the PC?

Run ipconfig again and check whether the PC’s IPv4 address changed. Then make sure v2rayN is running and listening. If the address changes often, reserve an address on your router for the network adapter the PC actually uses, then update the device’s proxy settings and the firewall rule’s scope.

My phone says the proxy server has a problem as soon as I turn on the proxy. Should I switch nodes?

Don’t switch nodes yet. Check that you haven’t entered a separate SOCKS5 port in the system’s HTTP proxy field, and make sure the address points to the PC, not the router. Only retest the same node on the PC if you’ve confirmed that the request reaches the core but the outbound connection fails.

Download v2rayN